|
Add: RM25A, LanSeHaiYunJu Building , NO.9 Shixia North 1st St.,Futian District,Shenzhen 518048 P.R,China.
Tel: 86-755-82844185 ,Fax: 86-755-82981320
MSN:yangyijian888@hotmail,com
Skype: yangyijian8733
E-mail: reliable@cnreliable.com reliable@cnreliable.hk reliable@cnreliable.us
WebSite: http://www.cnreliable.com http://www.cnreliable.hk http://www.cnreliable.us
http://cnreliable.en.alibaba.com/
http://www.made-in-china.com/showroom/cnreliable/
http://www.huawenyitech.com
http://www1.tradekey.com/profile_view/uid/2164100/ShenZhen-HuaWenYi-Technology-Co-Ltd.htm
1.key programmer for MB
Detailed Product Description
Programmer keys for MB ("smart key")
The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.
You read and program eeprom of CPU from Steering blocking module via diagnostic connector. Desolder and read via programmer two CPU from Electronic Ignition Control Module. Load theese eeproms to program. Desolder NEC CPU from the key. Soldering it on the device, select the No of key and program it. Solder all CPU on their places and start the car.
You can program new keys without the car - only with EIS and steering blocking module. You can read theese CPU with help ETL programmer for Motorolla CPU 68HC705X16(32).
2.HITAG-2 key tool
Detailed Product Description
With help of this tool you can generate key content for KEYS and transponders for Audi A8, VW Touareg, VW Phaeton, Bentley Continental, Porsche Cayenne, BMW E38, E39, E46, E53, E60, E61, E63, E64, E65, E66, E87, E90, E91, E92. Supported immobilizers EWS3, EWS3+, EWS4, CAS, CAS2, CAS3, Kessy, Kessy 2007/2008. With the help of programmer you can read and program internal key memory where are stored ODOMETER, VIN, ...
|
|
3.Key programmer OBD for Toyota
Detailed Product Description
Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.
Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
The operating step as follows: ( read the using step and the importance notice carefully)
1. Turn the ignition on with the right 4D chip key.
2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the LED?is on, as well as the anti-light SEC? which means the car is in the key programming state?
3. Take away the programmer from OBD.
4. Matches 2 pcs main key and 1 pc vice-key to the IMMO computer
Notice: 2 new main key and 1 vice-key are needed to close the programming procedure?
a) Close all the car door.
b) Insert the first new main key to the ignition for 5 seconds.
c) Insert the other main key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.
Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming)
a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO
Notice:
1. Must use the right Toyota 4D chip, otherwise you take the consequences.
2. Dont try to open the cover of programmer and dash board
3. This machine is only provided for the legal auto repair.
|
